--- title: "Cantilever Rack in Amherst, NY" url: https://buffalopalletrack.com/service-area/amherst/cantilever-rack description: "Amherst cantilever rack for assembly feedstock, extrusion bundles and supported sheet loads. Plan new equipment and installation: (716) 261-2779." lang: en --- Image: Cantilever Rack system inside a New York warehouse (https://buffalopalletrack.com/__l5e/assets-v1/cb0b4027-7062-4218-976a-0784f629ffa3/reference-cantilever-hero.jpg) Amherst, New York # Cantilever Rack in Amherst, NY Cantilever rack in Amherst addresses an assembly-feedstock requirement: long assembly feedstock needs a defined place before it reaches the cutting table or production bench. Arms mounted on uprights create an open loading face with no front columns, allowing lengthy bundles to enter from the side instead of passing through a pallet bay. For light assembly around CrossPoint Business Park and the I-290 corridor, the useful layout separates incoming lengths from kits already released to production. Bar, pipe, tube, lumber and sheet loads each need a support arrangement matched to their shape rather than a shared assumption about bundle weight. (716) 261-2779 ## Why plan cantilever rack around assembly? Buffalo Pallet Rack is a division of Warehouse Equipment & Supplies Co., supplying and installing storage equipment since 1997. We specify new equipment and manage scheduled installation with experienced installation crews, connecting the approved arrangement to the way material reaches your assembly area. We review access as carefully as storage positions. An Audubon-area flex building may need cart routes between workstations, while inspection and office entrances remain outside the long-load maneuvering envelope. Those constraints belong on the layout before anyone selects arm levels. Defined locations keep incoming lengths distinguishable from released assembly kits. Support positions address both full bundles and shorter remaining pieces. An unobstructed loading face accommodates lengthy material without front-column interference. Image: Cantilever warehouse racking holding steel tubing (https://buffalopalletrack.com/__l5e/assets-v1/ec7005f9-1a77-4546-aadf-8078e8adc4e4/reference-cantilever-2b.jpg) Image: Cantilever rack storing lumber and wood products (https://buffalopalletrack.com/__l5e/assets-v1/ab249a80-c3cd-46c6-a14f-78e72316fa6a/reference-cantilever-3b.jpg) ### Amherst Lane Storage Planning Selective pallet rack remains appropriate for palletized components needing individual access. Reserve the open-arm system for long goods whose support and handling requirements differ from those pallets; mixing both without defined boundaries can squeeze the production supply route. Medical devices Electronics Light assembly ## Your cantilever racking planning sequence For cantilever racking, begin with a representative inventory list and a measured sketch, including benches that cannot move. A rack footprint alone does not describe the space needed to retrieve a long bundle. 1 ### Document assembly feedstock List full bundles, partial bundles and cut remnants separately, with their dimensions and maximum weights. Include the handling attachments that actually carry those loads to storage. 2 ### Trace the longest movement Measure the route from receiving to the proposed row and onward to production. Compare a side-loader approach with the full turning sweep of a forklift carrying the longest piece. 3 ### Check the support schedule Set upright spacing, arm elevations and bearing requirements from the documented material range. Review the total upright and base loading before accepting a proposed quantity of storage levels. 4 ### Coordinate the installation window Agree on a clear work area and the sequence for installing new components. Experienced crews follow the approved layout, with configuration-specific load information available for operational handoff. ## Cantilever storage rack support details Cantilever rack arm length must support the actual bundle depth without inviting material to sit beyond its intended bearing area. Bearing capacity at each arm, total upright loading and the base configuration are checked together, including uneven loading between levels or faces. Support spacing follows material stiffness and the shortest pieces retained after cutting. Excessive spacing can allow sag; uneven overhang can shift the center of gravity away from the intended support pattern. Sheet products require appropriate decking or other specified support rather than an unsupported span. A single-sided arrangement can serve a perimeter position; double-sided rows require access to both faces and a corresponding load review. Indoor conditions and outdoor exposure call for suitable finish selection, with winter access considered wherever receiving crosses an exposed apron. Extrusions awaiting light-assembly cutting and preparation. Pipe and tube bundles separated by outside dimensions. Lumber and sheet materials with specified bearing support. Call (716) 261-2779: (716) 261-2779 ## Recent Installations Racking projects completed for warehouses across Buffalo and Western New York. Image: Pallet rack installation (https://buffalopalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://buffalopalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://buffalopalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://buffalopalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://buffalopalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://buffalopalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://buffalopalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://buffalopalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://buffalopalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://buffalopalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://buffalopalletrack.com/projects ## Discuss your feedstock layout Send the longest stock dimensions, bundle weights and a sketch of the receiving route so we can discuss a new storage arrangement for your assembly operation. Call (716) 261-2779. ### Buffalo Pallet Rack 2075 Kenmore Ave. Ste 100A Buffalo, NY 14207 (716) 261-2779 Monday - Saturday: 8:00 AM - 6:00 PM ## Assembly-stock questions ### Can an Amherst flex unit keep carts beside the rack? ### What information helps plan stock arriving near CrossPoint? ### Can sheet offcuts share an extrusion level? ### Should winter unloading change the indoor layout? ## Other Rack Types We Supply in Amherst ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://buffalopalletrack.com/service-area/amherst ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://buffalopalletrack.com/service-area/amherst/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://buffalopalletrack.com/service-area/amherst/pallet-flow-rack ### Drive-In Rack Fewer access aisles. The forklift enters the structure, and the floor holds dense bulk storage with fewer access aisles. View details https://buffalopalletrack.com/service-area/amherst/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://buffalopalletrack.com/service-area/amherst/carton-flow-rack ## Amherst planning coverage Planning for Amherst includes CrossPoint and Audubon operations where storage shares a building with production. Sheridan Drive access may influence the receiving route, but the internal door and aisle measurements determine placement. Cantilever Rack in Buffalo: https://buffalopalletrack.com/service-area/buffalo/cantilever-rack Cantilever Rack in Cheektowaga: https://buffalopalletrack.com/service-area/cheektowaga/cantilever-rack Cantilever Rack in Tonawanda: https://buffalopalletrack.com/service-area/tonawanda/cantilever-rack Cantilever Rack in North Tonawanda: https://buffalopalletrack.com/service-area/north-tonawanda/cantilever-rack Cantilever Rack in Lackawanna: https://buffalopalletrack.com/service-area/lackawanna/cantilever-rack Cantilever Rack in West Seneca: https://buffalopalletrack.com/service-area/west-seneca/cantilever-rack View All Service Areas: https://buffalopalletrack.com/service-area ## Warehouse Relocation in Amherst Moving to another building? Plan rack teardown, labeling, transport coordination, and reinstallation against the new layout. Relocation Services (https://buffalopalletrack.com/service-area/amherst/warehouse-relocation) ## Visit Our Buffalo Location Located in Buffalo, we serve all of Western New York with industrial pallet racks and warehouse storage solutions. ### Buffalo Pallet Rack #### Address 2075 Kenmore Ave. Ste 100A Buffalo, NY 14207 #### Phone (716) 261-2779 #### Business Hours Monday - Saturday: 8:00 AM - 6:00 PM Sunday: Closed ## Need Cantilever Rack in Amherst? Call (716) 261-2779 or request a quote and we will get a layout started. (716) 261-2779 Tap to Call: (716) 261-2779 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://buffalopalletrack.com/#business", "name": "Buffalo Pallet Rack", "url": "https://buffalopalletrack.com", "telephone": "(716) 261-2779", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "2075 Kenmore Ave. Ste 100A", "addressLocality": "Buffalo", "addressRegion": "NY", "postalCode": "14207", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": 42.9625359, "longitude": -78.8929003 }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday" ], "opens": "08:00", "closes": "18:00" } ], "hasMap": "https://maps.google.com/maps?cid=1384708661688644193&output=embed", "areaServed": [ { "@type": "City", "name": "Buffalo", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Amherst", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Cheektowaga", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Tonawanda", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "North Tonawanda", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Lackawanna", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "West Seneca", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Hamburg", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Orchard Park", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Lancaster", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Depew", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Williamsville", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Niagara Falls", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Lockport", "containedInPlace": { "@type": "State", "name": "New York" } }, { "@type": "City", "name": "Batavia", "containedInPlace": { "@type": "State", "name": "New York" } } ] }, { "@type": "Service", "@id": "https://buffalopalletrack.com/service-area/amherst/cantilever-rack#service", "name": "Cantilever Rack in Amherst, NY", "serviceType": "Cantilever Rack", "url": "https://buffalopalletrack.com/service-area/amherst/cantilever-rack", "provider": { "@id": "https://buffalopalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Amherst", "containedInPlace": { "@type": "State", "name": "New York" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://buffalopalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://buffalopalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Amherst", "item": "https://buffalopalletrack.com/service-area/amherst" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://buffalopalletrack.com/service-area/amherst/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can an Amherst flex unit keep carts beside the rack?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, if the measured layout preserves a separate cart path outside the moving load. Mark workstation approaches and office entrances before choosing row depth." } }, { "@type": "Question", "name": "What information helps plan stock arriving near CrossPoint?", "acceptedAnswer": { "@type": "Answer", "text": "Provide maximum bundle dimensions, weights and the receiving-door location first. Include how often long receipts overlap assembly replenishment so temporary staging does not become permanent aisle storage." } }, { "@type": "Question", "name": "Can sheet offcuts share an extrusion level?", "acceptedAnswer": { "@type": "Answer", "text": "Only with a support arrangement specified for both materials. Short sheets may need decking or additional bearing points even when the extrusion bundle fits the same arm depth." } }, { "@type": "Question", "name": "Should winter unloading change the indoor layout?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, when exposed receiving changes the usable approach. Allow for snow-clearing access outside and keep wet incoming bundles from forcing retrieval traffic through assembly workstations." } } ] } ] ```